Motor Cycle Bike

For Harley Motorcycle Stereo Power Amplifier 4ch 600 Watts Kit Bike Eletronics


For Harley Motorcycle Stereo Power Amplifier 4ch 600 Watts Kit Bike Eletronics
For Harley Motorcycle Stereo Power Amplifier 4ch 600 Watts Kit Bike Eletronics
For Harley Motorcycle Stereo Power Amplifier 4ch 600 Watts Kit Bike Eletronics

For Harley Motorcycle Stereo Power Amplifier 4ch 600 Watts Kit Bike Eletronics   For Harley Motorcycle Stereo Power Amplifier 4ch 600 Watts Kit Bike Eletronics

ALTHOUGH YOUR BIKE MAY BE LISTED ON THE VEHICLE COMPATIBILITY CHART IT IS ULTIMATELY THE BUYERS RESPONSIBILITY TO UNDERSTAND THAT THIS AMP IS A UNIVERSAL ITEM, MEANING IT WILL FIT ANY APPLICATION WITH A 12 VOLT SYSTEM, THIS IS NOT A PLUG AND PLAY ITEM / IT REQUIRES PROFESSIONAL INSTALLATION. Power your music wherever you go. Kenwood's KAC-M3004 compact 4-channel amplifier will power up the music in your vehicle with 50 watts RMS per channel.

To hear everything clearly above the noise of the road, trail, or waterway as you travel along. This little powerhouse will fit almost anywhere. Including a storage compartment on a boat, motorcycle, or ATV, so you can install great sound in whatever vehicle you wish. Installing a pair of subs?

You can bridge this amp to 2-channel mode and send 150 watts to each subwoofer. Weather-resistant protection for music on the go. Conformal coating protects the internal circuits from water and dirt, so the show will always go on, even through the roughest conditions. The speaker output terminals feature plastic-covered plugs that provide further protection for those connections.

The KAC-M3004 will accept a signal from just about any source, whether you're using RCA cables from an aftermarket receiver or speaker. Wires from a factory radio.

When you use the speaker-level inputs, the amplifier will sense the signal and turn itself on, so you won't need to. Run a remote turn-on lead to your car stereo.

50 watts RMS x 4 at 4 ohms (75 watts RMS x 4 at 2 ohms). 150 watts x 2 bridged at 4 ohms. Conformal-coated circuit board suitable for power sports and marine applications. Variable high- and low-pass filters (50-200 Hz, 12 dB/octave).

10-gauge power and ground leads recommended wiring and hardware not included with amplifier. Dimensions: 6-1/2"W x 1-3/4"H x 3-7/8D. The item "FOR HARLEY MOTORCYCLE STEREO POWER AMPLIFIER 4CH 600 WATTS KIT BIKE ELETRONICS" is in sale since Monday, May 4, 2015.

This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Accessories\Other Motorcycle Accessories". The seller is "a2z-car-audio-superstore" and is located in United States. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

  1. Manufacturer Part Number: KAC-M3004
  2. Brand: KENWOOD - HARLEY TOURING CRUISER RADIO CAR INSTALL
  3. Warranty: Yes
  4. Placement on Vehicle: Front
  5. Surface Finish: SILVER


For Harley Motorcycle Stereo Power Amplifier 4ch 600 Watts Kit Bike Eletronics   For Harley Motorcycle Stereo Power Amplifier 4ch 600 Watts Kit Bike Eletronics