Motor Cycle Bike

LAUNCH CNC602A 6-Cylinder Ultrasonic Fuel Injector Cleaner Tester for Petrol Car


LAUNCH CNC602A 6-Cylinder Ultrasonic Fuel Injector Cleaner Tester for Petrol Car
LAUNCH CNC602A 6-Cylinder Ultrasonic Fuel Injector Cleaner Tester for Petrol Car
LAUNCH CNC602A 6-Cylinder Ultrasonic Fuel Injector Cleaner Tester for Petrol Car
LAUNCH CNC602A 6-Cylinder Ultrasonic Fuel Injector Cleaner Tester for Petrol Car
LAUNCH CNC602A 6-Cylinder Ultrasonic Fuel Injector Cleaner Tester for Petrol Car
LAUNCH CNC602A 6-Cylinder Ultrasonic Fuel Injector Cleaner Tester for Petrol Car
LAUNCH CNC602A 6-Cylinder Ultrasonic Fuel Injector Cleaner Tester for Petrol Car
LAUNCH CNC602A 6-Cylinder Ultrasonic Fuel Injector Cleaner Tester for Petrol Car
LAUNCH CNC602A 6-Cylinder Ultrasonic Fuel Injector Cleaner Tester for Petrol Car
LAUNCH CNC602A 6-Cylinder Ultrasonic Fuel Injector Cleaner Tester for Petrol Car
LAUNCH CNC602A 6-Cylinder Ultrasonic Fuel Injector Cleaner Tester for Petrol Car
LAUNCH CNC602A 6-Cylinder Ultrasonic Fuel Injector Cleaner Tester for Petrol Car

LAUNCH CNC602A 6-Cylinder Ultrasonic Fuel Injector Cleaner Tester for Petrol Car    LAUNCH CNC602A 6-Cylinder Ultrasonic Fuel Injector Cleaner Tester for Petrol Car
LAUNCH CNC602A 6-Cylinder Ultrasonic Fuel Injector Cleaner Tester for Petrol Car. CNC-602A is an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions.

It can also perform cleaning on the injectors and fuel supply system on vehicle. Why have to clean injector. When we turned off the engine suddenly, the gasoline which have been spray out can not be recycled. It would attached on the injector and combustion chamber walls.

Gasoline is easy to volatile, but wax and varnish were stayed. Heat these wax and varnish day after day, they will be changed into hard coke. The hard coke will be produced more quickly and more thickly when engine work with poor quality fuel.

The hard coke lead 4 problems on injector. So we have to clean injector and engine system. (220V-110V converter need 40USD extra). You will find them in local market. This machine was for six-cylinder car.

Block 2 tube for 4 jar car. Item fit for two kinds of injectors. Top feed injector accessories were standard configure. Side feed injector accessories for option. Support no dismantle clean car fuel system.

Need additional connector kits, not include in the item. Add 80USD to get it. The machine fit for most of petrol injector(come with lots of adapters), but not for diesel injector.

Perform simultaneous cleaning on several injectors and remove the carbon deposits on the injectors completely. Test the uniformity each injector, and monitor the spraying status of each injector with the help of backlight.

This test is also for reverse flush. Test the sealing and dribbling conditions of injectors under system pressure.

Injecting Flow Fest: Check the injecting amount of 15 seconds constant injection. Test injectors by simulating different working conditions.

The unit is equipped with various adaptors and couplers that facilitate cleaning injectors on vehicle. Cleaning hard coke from injector via ultrasonic and auto electronic technology. Imitate working as vehicle's fuel system.

Washable testing single-point injection as TBI, CFI, ECI and CIS. The minimum pulse width test.

Simulated RPM range: 109990rpm; step: 10rpm. Pulse width: 0.525ms; step 0.1 ms. Audi, Australia Ford, Benz, BMW, Brilliance, Chevrolet, Chevy, Chrysler, Citroen. Dacia, Dadi, Daewoo, Daihatsu, Demo, Fiat, Ford, GM, Holden. Honda, Hyundai, Isuzu, Jaguar, Kia, Lancia, Land Rover, Mahindra, Maruti, Mazda, Mitsubish, Nissan, Opel.

Peugeot, Porsche, Renault, Romeo, Rover, Saab, Seat, Skoda. Smart, Subaru, Suzuki, Tata, Toyota, Volvo, VW, Yamaha.

1 x CNC602A Main Machine. 201020068 6-cylinder fuel distributo kits. 103250014 Adaptor for fuel top-supply injector. 103250028 Stopper for fuel distributor.

103230107 Adjusting pole for reverse flush. 103250013 Adaptor for fuel top-supply injector.

103250015 Swiss thread adaptor for fuel top-supply injector. 103250016 Coarse thread adaptor for fuel top-supply. 105020217 pulse signal connection cable 1. Be used for the connection. Of special injector, T=0.5.

105020218 pulse signal connection cable 2. Of special injector, T=0.8.

101020131 6-cylinder Injector pulse signal cables. 104130024 Lots of different O rings. 1We are a professional worldwide wholesale company, with own factory located in China. We supply many products on Automobile consumer. Also offer reasonable prices , excellent customer service and a reliable credit standing are our target! We are a professional Authorized dealers of AUTOOLLaunchAutel and Xtool. 3Global logistics systemUS warehouse, German warehouse, China warehouse. The item "LAUNCH CNC602A 6-Cylinder Ultrasonic Fuel Injector Cleaner Tester for Petrol Car" is in sale since Friday, May 6, 2016. This item is in the category "Vehicle Parts & Accessories\Garage Equipment & Tools\Diagnostic Equipment & Tools\Other Diagnostic Service Tools". The seller is "toolsmakeforlife16" and is located in Shenzhen.

This item can be shipped worldwide.

  1. Brand: Launch
  2. Manufacturer Part Number: Does Not Apply
  3. Country/Region of Manufacture: China
  4. Item type: Fuel Injector Cleaner and Tester
  5. Warranty: 1 Year
  6. Weight: 35 kg
  7. Special feature: Ultrasonic clean car motorcycle injector
  8. Language: English
  9. Voltage: 220V/110V
  10. Vehicle Type: Heavy Duty/Commercial
  11. Type: Injector Tester


LAUNCH CNC602A 6-Cylinder Ultrasonic Fuel Injector Cleaner Tester for Petrol Car    LAUNCH CNC602A 6-Cylinder Ultrasonic Fuel Injector Cleaner Tester for Petrol Car