Compact 2-channel car amplifier 100 watts RMS x 2. You won't believe how small and powerful this amp is. Rockford Fosgate's PBR300X2 2-channel amp puts out 100 watts RMS each to a pair of speakers, all from an amp you can easily hold in one hand.You can also put this amp in one-channel mode to drive a sub with 300 watts RMS of bumping bass. And an optional wired remote control lets you add Rockford Fosgate's famous extra Punch from the front seat. Boosted Rail (BR) amp technology.
This Punch Class BR amplifier uses Boosted Rail (BR) amp technology to generate so much power from such a tiny case, with capacitors and high-speed circuitry that boost the amp's power supply voltage when needed, so it can handle musical peaks without missing a beat. Rockford Fosgate uses this new technology to create a remarkable amp that fits almost anywhere and delivers powerful sound.The amp also features speaker-level inputs with signal-sensing turn-on, allowing you to connect into almost any system without having to run a turn-on lead back to the receiver. An extruded aluminum heat sink combines with Rockford Fosgate's heat management technology to make sure your tunes keep rockin' even when you're playing loud. 100 watts RMS x 2 at 4 ohms (150 watts RMS x 2 at 2 ohms). 300 watts RMS x 1 bridged output at 4 ohms (4-ohm stable in bridged mode). Dynamic Thermal Management cooling system.
Variable high- and low-pass filters (50-500 Hz, 12 dB/octave). Differential-balanced inputs eliminate noise from your vehicle's electrical system. Optional wired PEQ Remote (0-18 dB at 45 Hz and 0-12 dB at 12K Hz). 10-gauge power and ground leads and a 30-amp fuse recommended wiring and hardware not included with amplifier.
No onboard fuses when installing multiple amps in a system, an additional 30-amp in-line fuse between the distribution block and the amplifier is recommended. Dimensions: 6-3/4"W x 1-9/16"H x 4-1/4D.
Boosted Rail Technology: The Rockford Fosgate PBR300x2 uses Boosted Rail Technology (BRT), an efficient design that doesn't use a switching power supply. The PBR300x2's average efficiency is more than 75%, meaning it doesn't generate much heat and can maintain a small footprint. CEA 2006 Compliant: The PBR300x2's power ratings are measured according to standards provided by the Consumer Electronics Association (CEA). These standards allow you to accurately compare the rated power output of all CEA 2006-compliant amplifiers, even if they come from different brands.
Manufacturers who adhere to the standards can display the CEA 2006 logo on their products and packaging. These CEA2006 Power Specifications are measured at 20-20kHz, 14.4 V, and 1% THD+N.Two-channel 4: 100 watts RMS x 2. Two-channel 2: 150 watts RMS x 2.
Bridged Mono 4: 300 watts RMS x 1. Signal Input: The PBR300x2 is compatible with either line-level (RCA) or speaker-level inputs. The included Molex-to-RCA is used in both cases; the RCA end is cut off for connection to speaker wires. Auto Turn-on: When using speaker-level inputs the amp will automatically turn on when it senses an input signal (4 volt minimum). The threshold voltage (DC offset) for auto turn-on is adjustable from 4 volts to 6 volts.This circuit is only active when the Input Level switch is set to High (speaker-level). Dynamic Thermal Management (DTM): DTM evenly distributes excess heat across the entire extruded aluminum heatsink. This helps to keep internal components cool, thus increasing efficiency, reducing distortion, and maximizing the potential of all components. MEHSA³: MEHSA³ (Maximum Efficiency Heat Sink Application-Third Generation) is a Rockford Fosgate proprietary process that increases the heat transfer from the MOSFET devices to the heatsink. The multi-layer insulated metal MEHSA substrate operates with minimal thermal resistance, spreading heat both downward and outward to quickly dissipate heat from each device across the heatsink. This allows greater power output, enhanced thermal stability, and maximum reliability. NOMAD: NOMAD (NOn-Multiplying Advanced Decision) is an intelligent protection circuit that uses an analog computer to make real time decisions regarding temperature, voltage, current and impedance. The unit is protected without limiting sound output unless needed. DSM (Discrete Surface Mount): In the manufacturing process high speed robotics are used to place 1% tolerance parts and large board traces. DSM improves the efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature. LEDs: The Power/Protect LED on the right side of the amp illuminates blue when the amp is turned on and operating normally; it illuminates red when one of the protection circuits has engaged (short circuit, impedance too low, or temperature too high). The BRT LED on the left side of the amp illuminates white when the boost mode is engaged.
Crossover: The amplifier's internal low-pass crossover is continuously variable from 35 Hz to 250 Hz; the slope is 12 dB/octave. Gain: When using line-level inputs, the input gain is adjustable from 150mV to 4V, when using speaker-level inputs it's adjustable from 400mV to 11V. Input Level: Use the 2-position switch to select the input voltage range; High (speaker-level) or Low (line-level). DC Offset: The DC offset threshold voltage for the auto turn-on circuit is adjustable from 4 volts to 6 volts (feature only active when the Input Level switch is set to High).When connected, the Punch EQ2 on-board equalization circuit is activated to help correct inherent acoustical deficiencies in the automobile listening environment. When the amp's Crossover Switch set to Low-Pass operation, the Punch EQ2 circuit provides a variable Bass Boost. When set to High-Pass, it acts as a variable Mid-Bass and Treble Boost. Both Bass and Treble frequencies are boosted when the amp is set to All-Pass operation.
Power Connections: The power, ground, and remote turn-on terminals are c-clamps on a removable plug. Each terminal will accommodate up to 10-gauge wire (Rockford recommends 10-gauge minimum for the power and ground wires). A flat blade screwdriver (not supplied) is required to tighten/loosen the terminals.
There is no fuse on the body of the amp, so an external 30-amp fuse (not included) must be installed in the power wire. If a wiring kit is used that includes a different value fuse, the original should be replaced with a 30-amp fuse. Signal Input: The included input harness has a Molex plug on one end (plugs into the amp) and female RCA plugs on the other.
When using speaker-level inputs the RCA end is removed and the four individual wires are spliced onto the head unit's speaker wires. Speaker Output: The included speaker output harness has a Molex plug on one end (plugs into the amp) and tinned bare wires on the other. Remote Punch EQ: The amp's RJ-45 jack allows you to connect the optional Remote Punch EQ. Note: Older model (prior to 2007) Punch Bass and Para-Punch remotes will not work with this amp.
The item "NEW ROCKFORD FOSGATE PUNCH PBR300X2 MINI AMP MOTORCYCLE 300 WATT RMS PBR 300X2" is in sale since Monday, March 23, 2015. This item is in the category "Consumer Electronics\Vehicle Electronics & GPS\Car Audio\Car Amplifiers".
The seller is "a2z-car-audio-superstore" and is located in Multiple Warehouses. This item can be shipped to United States, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Luxembourg, Macao, Martinique, Nicaragua, Pakistan, Paraguay, Viet nam, Uruguay, China, Bangladesh, Guernsey, Gibraltar, Jersey, Liechtenstein, Monaco, Peru, Russian federation, Canada, South africa, Colombia, Antigua and barbuda, Saint lucia, Barbados, Bermuda, Cayman islands, Sri lanka, Maldives, Oman, Reunion.