Automotive Sensor Simulator AutoSim

  
Automotive Sensor Simulator and Tester. Simulation of O2 Zirconia Sensor.

Simulation of O2 Titania Sensor. Simulation of CKP Inductive and CKP Hall sensors. Description AutoSim is a smart testing device with power-on self-test.

It is mainly used to simulate the output signal from automotive sensors: frequency, voltage, and O2 sensor signal. The users can enjoy great convenience provided by its user-friendly interface and fault tolerance design. AutoSim picks up a service problem where the on-board computer's diagnosis ends.

Sensors tell the on-board computer something is wrong. AutoSim lets the technician determine if the faulty operation is a faulty sensor, a defect in the wiring or a problem in the computer itself. The product is mainly used for wiring tests.

This is because the device can simulate the voltages and check the live data readings on the scan tool to confirm the wiring. You can simulate most sensors from ABS to O2 sensors. Eliminates need to replace non-defective sensors, by the time you have changed a couple of un-needed sensors the device has paid for itself. Simulates actual working condition of the most automotive sensors; Simulates O2 sensor signal; Checking of basic ECU operation; Controlling the output signal allows to check the ECU response and operation; It can drive ECU into "open" or "closed" loop; Activation of some actuators. Hand-held sensor simulator tester; Works independently or with any scan tool or oscilloscope; Eliminate unnecessary replacement of non-defective sensors; Sensor simulation: voltage; frequency; O2 sensor signal; Trigger output impulse; Digital LCD display shows actual output of signals; Matrix LCD screen with backlight; Output short circuit current protection; Anti-dirt film keyboard.

Up to 0.15 amperes maximum. 0.2V to 12V output amplitude can be selected at each mode. Output short circuit current protection. 12V DC (auto battery typical). 9V DC 40V DC maximum.

195mm x 100mm x 40mm. 1 x AutoSim Main Unit. 1 x AutoSim Main Signal Cable. 1 x Power Cable-2.5mm DC Plug to Alligator Clips. The item "Automotive Sensor Simulator AutoSim" is in sale since Saturday, February 1, 2020. This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Other Diagnostic Service Tools". The seller is "autoditex" and is located in Stara Zagora. This item can be shipped worldwide.

1. Country/Region of Manufacture: Bulgaria
2. Vehicle Type: ATV
3. Brand: AUTO DITEX
4. Non-Domestic Product: No
5. Warranty: 1 Year