Such as fuel pipe, air intake system EVAP system and cooling tank. Adjustable Flow Switch and Fluidometer Guage help control easily.Air pressure Guage and smoke switch button control. Smoke oil level display, smoke oil drain control switch. SDT-206 is for all pipe systems include EVAP.
Please do leak detection away from smoke-sensitive parts. Do not run the detector over 5 minutes. If it exceeds working limit, it will power off automatically. In this condition, please operate it later. Voltage: DC 12V(Supplied by Automotive Battery).Pneumatic Output:Built-in two compressors. (Adjustable 0-23PSI DO NOT harm to EVAP System). Heating Material: Mineral Oil or Baby Oil(oil not included). Controllable flow value:Adjustable Flow Switch and Fluidometer Guage help control easily. When you use this detector the first time, please fill 20-30ml oil, not beyond this range.
New oil can be filled with only when the smoke is light, and it can't be filled over 15ml every time. Before filling new oil, please pour out the remaining oil in the detector. Please replace the detector oil regularly. The machine just support 12V cars, if you want to test 24V trucks, do not plug it in your truck directly.
Please charge it via a independent battery. Open the engine cover, and hang the detector in the cover. Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle. Please secure the other side with a rubber stopple.Secure this side with proper taper stopple/pipe, and connect it with smoke output tube. Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way. Turn on the power switch, and detector starts to work. Control the input smoke value and pressure to make sure the pipe system can afford the pressure. In about 3 minutes, the pipe will be filled with smoke. Observe the floating ball in flow gauge. If the floating ball stays still in the bottom, the pipe is sealed with.
If the floating ball is arising or bouncing, the pipe is leaking. Position the leak points by floating ball. If the bounce arises highly, the leakage is serious. Please use head lamp if necessary. After leak detection, please connect well the wires and pipe.
With longtime high temperature, the smoke and oil will oxidize and deteriorate. It will infect the service life of smoke generated part, so please change smoke and oil regularly. When the smoke output has water drops, please replace with new oil.Liquid paraffin and baby oil are OK. Please fill new oil with equipped oil bottle. Power: DC 12V, vehicle battery. Fit for:cars, trucks , vans, motorcycle. 1x Hook (with hand-tighten nuts). 1x Rubber stopples (with serial specification).
If your package delayed few days, due to any unexpected factor, please wait patiently. Your kindly understanding and great patience would be highly appreciated! Please do not hesitate to leave us your 5 Star.Thank you for your kindness. We are reliable supplier to both wholesalers and retail sellers. And we are a professional Authorized dealers of. Also offer reasonable prices , excellent customer service and a reliable credit standing are our target! We supply many products on Automobile consumer. We have OBDII cars / Light Trucks / Heavy Duty Truck's. Battery Tester, Fuel Injector Cleaner Machine , Smoke Leak Detector Machine, Digital Circuit Tester, lgnition Spark Tester , Engine Timing Tool. And much more others products. Wish we can solve the problem peacefully. We will reply you within 12 hours and do our best solve the problem with you Except on Weekends and.
The item "Autool SDT206 Car Smoke Machine Leak Detector Diagnostic Tester EVAP Air Mode" is in sale since Wednesday, April 17, 2019. This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Other Diagnostic Service Tools". The seller is "beherenow177" and is located in Shenzhen. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia, Mexico.