Car EVAP Smoke Machine Leak Detector Pipe Systems Smoke Tester Diagnostic Tool

  
Car EVAP Smoke Machine Leak Detector Pipe Systems Smoke Tester Diagnostic Tool. AUTOOL SDT-106 is designed for detecting the leakage of pipe systems on cars, motorcycles, trucks quickly and exactly. Ntake system test, exhaust systems test, cooling system test, car sealing test, and fuel tank system test. EVAP is a fuel evaporation control system used to collect and deal with fuel vapor, to prevent fuel vapor leakage.

If the leak will pollute the atmosphere and even cause the vehicle to spontaneous combustion. Plus this set of accessories can detect the smoke of the EVAP system, check whether there is leakage, broken, enhanced traffic safety. Machine size: 210mm x 135mm x 110mm. Hook: To hang the detector when detecting. Working Indicator: It is lit when the detector works.

Power Switch: Power it on, and the detector works. Smoke Output Tube: The smoke outlet which connecting with detection port. Power Clamp: To connect with vehicle battery. Open the engine cover, and hang the detector in the cover.

Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle. Please secure the other side with a rubber stopple. Secure this side with proper taper stopple/pipe, and connect it with smoke output tube.

Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way.

Turn on the power switch, and detector starts to work. In about 3 minutes, the pipe will be filled with smoke. Please use head lamp if necessary.

After leak detection, please connect well the wires and pipe. When you use this detector the first time, please fill 20-30ml oil, not beyond this range. New oil can be filled with only when the smoke is light, and it can't be filled over 15ml every time. Before filling new oil, please pour out the remaining oil in the detector. Please replace the detector oil regularly.

Please do leak detection away from smoke-sensitive parts. Do not run the detector over 8 minutes. If it exceeds working limit, it will power off automatically. In this condition, please operate it later. The round parts of this detector is with temperature, be careful to avoid scalding injury. With longtime high temperature, the smoke and oil will oxidize and deteriorate. It will infect the service life of smoke generated part, so please change smoke and oil regularly. When the smoke output has water drops, please replace with new oil. Liquid paraffin and baby oil are OK. Please fill new oil with equipped oil bottle. 1pc AUTOOL SDT106 smoke machine. 1pc Hook (with hand-tighten nuts). 1set Hard Rubber Hose Plug (with serial specification).

1pc Test Oil Refill Bottle(oil not included). We are a professional worldwide Professional company.

We are reliable supplier to both wholesalers and retail sellers. We supply many products on Automobile consumer.

Also offer reasonable prices , excellent customer service and a reliable credit standing are our target! All messages be reply within 24 hours.

The item "Car EVAP Smoke Machine Leak Detector Pipe Systems Smoke Tester Diagnostic Tool" is in sale since Tuesday, July 7, 2020. This item is in the category "Vehicle Parts & Accessories\Garage Equipment & Tools\Diagnostic Equipment & Tools\Other Diagnostic Service Tools". The seller is "cartools2019" and is located in Shenzhen.

This item can be shipped to North, South, or Latin America, all countries in Europe.

1. Supported System: ABS
2. OBD Interface: CAN
3. Country/Region of Manufacture: China
4. Item Size: 8.2inch x 5.3inch x 4.3inch
5. Voltage: DC 12V
6. Smoke output value: 6l/min
7. Type: EVAP Machine
8. Feature: Buil-in air supply
9. Warranty: 3 Year
10. Manufacturer Part Number: AUTOOL SDT-106
11. Vehicle Type: Heavy Duty/Commercial
12. Brand: AUTOOL
13. Test Liquid: Baby Oil(Does not include)