EVAP Smoke Machine Car Truck Boat Leak Detector Pipe Exhaust Intake Vacuum Test

  
EVAP Smoke Machine Car Truck Boat Leak Detector Pipe Exhaust Intake Vacuum Test. AUTOOL SDT205 is designed for detecting the leakage of pipe systems on cars, motorcycles, such as fuel pipe, vacuum, air intake system and cooling tank.

SDT205 is for all pipe systems include EVAP. Please do leak detection away from smoke-sensitive parts.

Do not run the detector over 5 minutes. If it exceeds working limit, it will power off automatically. In this condition, please operate it later. Fit for: cars, trucks , vans, motorcycles. The machine just support 12V cars, if you want to test 24V trucks, do not plug it in your truck directly.

Please charge it via a independent battery. Open the engine cover, and hang the detector in the cover. Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle. Please secure the other side with a rubber stopple. Secure this side with proper taper stopple/pipe, and connect it with smoke output tube.

Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way. Turn on the power switch, and detector starts to work.

Control the input smoke value and pressure to make sure the pipe system can afford the pressure. In about 3 minutes, the pipe will be filled with smoke. Observe the floating ball in flow gauge. If the floating ball stays still in the bottom, the pipe is sealed with. If the floating ball is arising or bouncing, the pipe is leaking. Position the leak points by floating ball. If the bounce arises highly, the leakage is serious. Please use head lamp if necessary.

After leak detection, please connect well the wires and pipe. When you use this detector the first time, please fill 20-30 ml oil, not beyond this range. New oil can be filled with only when the smoke is light, and it can't be filled over 15 ml every time. Before filling new oil, please pour out the remaining oil in the detector.

Please replace the detector oil regularly. With longtime high temperature, the smoke and oil will oxidize and deteriorate.

It will infect the service life of smoke generated part, so please change smoke and oil regularly. When the smoke output has water drops, please replace with new oil. Liquid paraffin and baby oil are OK. Please fill new oil with equipped oil bottle. 1x Hook (with hand-tighten nuts). 1xRubber stopples (with serial specification). Usually we use E-packet, sometimes DHL/EMS and other Excellent Service is used per customers' request. For those who are outside US. HK POST/SG POST/ DHL /EMS ect. It all depends on our customers' choices.

Hope we can deal with soon and let us witness this moment. We are Mrcartool, a professional automotive repair and maintain enterprise. Our own factory and chain repair shop located in China. We supply many products on Automobile consumer electronics, such as coder reader, diagnostic tool, GPS, DVR, bluetooth Car kit, injector cleaner and battery system tester etc. High product quality, reasonable prices, excellent customer service and a reliable credit standing is our target.

Feedback is very important to us. It is impossible to address issues if we do not know about them!

The item "EVAP Smoke Machine Car Truck Boat Leak Detector Pipe Exhaust Intake Vacuum Test" is in sale since Thursday, November 12, 2020. This item is in the category "Vehicle Parts & Accessories\Garage Equipment & Tools\Diagnostic Equipment & Tools\Other Diagnostic Service Tools". The seller is "cardealmarket" and is located in ShenZhen. This item can be shipped worldwide.

1. Brand: AUTOOL
2. Country/Region of Manufacture: China
3. Manufacturer Part Number: SDT205
4. Warranty: 3 Year
5. Type: EVAP Machine
6. Vehicle Type: Heavy Duty/Commercial
7. OBD Interface: CAN
8. Power Supply: 12V
9. Smoke output value: 6l/min
10. Fit for: Cars,Trucks ,Vans,Motorcycle, Boat
11. Supported System: EVAP System
12. Feature: Built-in Air Pump / Use Baby Oil