Twin Bottle system for max performance and looks. Brackets Will be SILVER and the bottles will be SILVER. See notes at bottom of page. Contact DynoTune for other bottle and bracket colors. This Uuniversal DynoTune dry kit will add up to an additional 40HP to your Ride.Comes with eveything you need for a complete installation. (some fabrication may be needed as this kit is universal) This Dry kit uses your bikes EFI sensors to add the additional fuel needed to make the Power! By passing the cool nitrous charge past the Air Temperature sensor in the intake track, we can fool the bikes EFI system into adding the little extra fuel you need to make some sweet power!
Note: Consult your factory manual to make sure you have a "Air Temperature" sensor in your intake (Most EFI Bikes have a Temp sensor). Comes with three jet settings of 15HP, 30HP, and 40HP.Comes with twin 12oz bottles(shown on bike above). Kit Comes complete with instructions on how to use your Horn or starter for nitrous activation making it a clean installation. The Twin inlet system allows the user to configure the inlet any way they want. Single or dual snorkel intakes, its all in the kit! High Heat/Pressure teflon tubing inculded. Note: In the Video, The Purge kit, V nozzle and braided line from purge solenoid are optional Items from DynoTune. Note: Some fabrication and mounting screws/hardware is required to mount the billet bottle brackets. The frame or rear foot pegs are the best location. The Kit contains the following. 2 12oz SILVER Nitrous Bottles. 2 SILVER bottle mounting brackets. 2 two foot stainless bradied nitrous lines. 175HP High flow Nitrous Solenoid.
Solenoid mounting bracket with hardware. Twin mounting nozzles with mounts for dual snorkel intakes. High Pressure/Temperture Teflon Tubing (connects solenoid to nozzles). "T" fitting and compression fittings.Bottles simply twist off in seconds for the ulitmate in quick filling. 3 nitrous jets (NOS style) 15-30-40HP. Complete electrical kit with switches, wire, connectors and a complete manual showing how wire your horn or starter button as the activation switch.
NOTE: ZX-14 or GSXR requires an adaptor to mount the brackets to the bike, contact DynoTune direct for the adaptors. NOTE: Old style bracket shown above.All the new brackets shown below will have the larger round knobs. The knobs are much easier to turn, will not come off, and the brackets are thicker and stronger than ever! It comes with a Gauge port built into the side of the bracket (1/8 NPT threads) plus the standard outlet fitting on the opposite side.
This kit is universal, for direct bolt on kits contact dynotune. The item "Motorcycle Nitrous Oxide Kit Twin Bottles Hayabusa GSXR1000, drag bike nitrous" is in sale since Wednesday, January 11, 2017. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Nitrous & Parts". The seller is "dynotunesales" and is located in Bradenton, Florida. This item can be shipped worldwide.