THINKCAR THINKDIAG 2 supports CANFD protocol, supports more cars. New ThinkDiag 2 ALL Car Brands canfd protocol All Reset Service 1 Year Free 2022 OBD2 Diagnostic Tool Active Test ECU Surpass.
Supports For Chevrolet Tracker 2020 year. Supports For Chevrolet Suburban 2021 year. Supports For Chevrolet Tahoe 2021 year. Supports For Cadillac Escalade 2021 year.
Supports For GMC Yukon 2021 year. Supports For GMC Yukon XL 2021 year. English, French, Spanish, German, Portugese, Italian, Japanese, Russian, Polish, Turkish. ThinkDiag 2 is a professional diagnostic device with OE level functions. ThinkDiag 2 Work on Android and IOS.
Thinkdiag 2 can not only support Android system, but also IOS system. ThinkDiag 2 is with All software 1 year free Update (including All Vechicles Diagnostic Software + Maintenance software)! After 1 year, it will takes about USD159.99 to Subscribe the update.THINKCAR ThinkDiag 2 is widely used, it can for car owner, Automotive service technician, Car Shop, Small garge etc. What Function of THINKDiag 2 is advantage than THINKDIAG? THINKDIAG 2 Supports CANFD protocol, more protocol than thinkdiag. THINKDIAG 2 Supports more cars than thinkdiag, like For GM car 2021 year. THINKDIAG 2 is with 5.0 Bluetooth (thinkdiag is 4.2 bluetooth). THINKDIAG 2 is with Double side indicators, Upgrad soft rubber Sleeve, obd2 cable.
ThinkDiag 2 Support print, you can print the diagnose result via normal printer. ThinkDiag 2 supports Remote Diagnosis, if you have the problem when you diagnose, you can use this function to help you solve the problem. ThinkDiag 2 supports Online Diagnostic Report, you can share the report to the Client online. Thinkdiag 2 Full system Diagnosis.
Thinkdiag 2 can diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and China. Full range car models and full car system diagnose make it a professional automotive diagnostic tool. Diagnosis functions include: Read DTCs, Clear DTCs, Read datastream, Special functions etc. To diagnose Brake Systemif you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation.To diagnose Emission Systemif the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined.
To diagnose Fuel systemif vehicle won't start or "Check Engine" light is illuminated. Check car's fuel system regularly ensures the best performance of your car with the lowest emissions. To diagnose Transmissionif your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car. To diagnose Wiper Systemif you observe chattering or streaking wiper.If the car is not regularly checked, the accident might happen because you can't see clearly. To diagnose Light Systemif you see rapid signal blinking or dimming lights. Thinkdiag 2 Supports Full OBD2 Diagnostic Functions.
Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs). Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors. Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data. I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer.
On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems. Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability. 16 maintenance functions to meet the maintenance vehicle repair and after-sales maintenance. The lightening of the car maintenance light indicates that the vehicle needs maintenance.
Reset themileage or driving time to zero after the maintenance, so the maintenance light will go out and the systemwill start a new maintenance cycle. To reset the steering angle, first find the relative zero point position for the car to drive in straight line. Taking this position as reference, the ECU can calculate the accurate angle for left and right steering.
After replacing the steering angle position sensor, replacing steering mechanical parts (such as steeringgearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recoveringcar body, you must reset the steering angle. Lf the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to theon-board computer to replace the brake pad. After replacing the brake pad, you must reset the brake pad. Battery Register & Battery Maintenance. This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, inwhich the original low battery fault information will be cleared and battery matching will be done.
When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system torestore ABS brake sensitivity. Lf the ABS computer, ABS pump, brake master cylinder, brake cylinder, brakeline, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS. Electronic Throttle Position Reset & Learn.Diesel Particulate Filter (DPF) Regeneration. Tire Pressure Monitor System Reset.
After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting functionmust be performed to reset tire pressure and turn off the tire pressure MIL. Tire pressure resetting mustbe performed after maintenance is performed in the following cases: tire pressure is too low, tire leaks, tirepressure monitoring device is replaced or installed, tire is replaced, tire pressure sensor is damaged, andtire is replaced for the car with tire pressure monitoring function. The crankshaft position sensor learns crankshaft gear machining tolerance and saves to the computerto more accurately diagnose engine misfires.Lf gear learning is not performed for a car equipped withDelphi engine, the MlL turns on after the engine is started. The diagnostic device detects the DTC P1336'gear not learned'. In this case, you must use the diagnostic device to perform gear learning for the car. After gear learning is successful, the MIL turns off. After the engine ECU, crankshaft position sensor, orcrankshaft flywheel is replaced, or the DTC'gear not learned is present, gear learning must be performed.
To prevent the car being used by unauthorized keys, the anti-theft key matching function must beperformed so that the immobilizer control system on the car identifies and authorizes remote control keysto normally use the car. When the ignition switch key, ignition switch, combined instrument panel, ECu, BCM, or remote control battery is replaced, anti-theft key matching must be performed. Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder soas to more accurately control or correct cylinder injection quantity.After the ECU or injector is replaced, injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identifyinjectors to accurately control fuel injection. This function can adjust the height of the body. When replacing the body height sensor in the airsuspension system, or control module or when the vehicle level is incorrect, you need to perform thisfunction to adjust the body height sensor for level calibration. This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox isdisassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impactproblem. In this case, this function needs to be done so that the gearbox can automatically compensateaccording to the driving conditions so as to achieve more comfortable and better shift quality. This function can set the sunroof lock off, closed when it rains, sliding / tilting sunroof memory function, temperature threshold outside the car etc. This feature is used to initialize the adaptive headlamp system. According to the ambient light intensity, theadaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjustthe headlamp lighting angle while monitoring the vehicle speed and body posture. This function is used to learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or replaced. ThinkDiag 2 supports Active Tester (Bi-Direction Control) and ECU Coding. The two function are supported in Launch x431 devices. Active Test &Bi-directional control Function. Bi-Directional Control capability and is capable of performing Active Tests to access vehicle-specific subsystems and component tests. The tester outputs commands to the ECU to drive the actuators in order to determine the integrity of the system or parts by reading the ECU data, or by monitoring the operation of the actuators. Also it will actuate solenoids valve and actuators for active testing to identify the error easily moreover. The bidirectional functions are quite extensive. Valve and seeing the difference in idle response and oxygen sensor voltage. The advanced coding function is used to re-flash the vehicle control modules, which allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements, providing solutions for the issues of drivability, fuel efficiency, power loss, fault codes, durability of mechanical parts etc. THINKDIAG 2 is an Automotive Diagnostic Device same like easydiag. You can delete car errors codes and reset the system if you have the thinkdiag 2. ThinkDiag 2 is perfect to use with our unique App. Easy and convenient, anytime and anywhere. Comprehensive functions include diagnostic module, ThinkStore module, ThinkMoments module, Me module, etc. Support system: Android & IOS. Bluetooth: Hardware supports 5.0BLE, Bluetooth dual mode. Shell material: ABS+PC+TPU rubber sleeve. Lenth of obd Cable : 0.65 meter. 1pc Thinkdiag 2 with obd2 cable. Bank deposit / Internet Transfer. We are not responsible for undeliverable address. We are NOT directly liable for any lost or damaged goods, but we'll try our best to solve the problem with buyers. 12 months free repair for the devices. We are specialized dealer of On-Board Diagnostic tools and automotive electronics.
For more than 10 years. We are authorized first class distributor of Launch, Thinkcar, Ediag, Kingbolen and other brands. And more brands will be show in our store in near future. Business time: GMT8 (9:00-18:00) from Monday to Friday.If you are satisfied with our product and service, pls give us a 5 star feedback and a good review, i will be very appreciated for that. Thanks for your support and trust! This item is in the category "Vehicle Parts & Accessories\Garage Equipment & Tools\Diagnostic Equipment & Tools\Other Diagnostic Service Tools". The seller is "uk-launch" and is located in this country: GB. This item can be shipped to United Kingdom.