VOLspeed for Bosch Motor V4 Tuning Chip Kit eBikes 2014-2023 free UK shipping

  

What does this Tuning Kit do? A smart Tuning Kit Volspeed V4 with an option to set a speed limit of an e-bike of your own choice. After the chip is installed, your e-bike's display will show real data, such as maximum and average speeds, daily mileage and cruising range.

In contrast to the almost complete elimination of the speed limit with other tuning modules, this module still allows a very sporty riding style with moderate battery consumption by slightly increasing the limit, e. For a more natural riding experience, the dynamic mode spreads the downshift over a wider speed range, the so-called "wall effect" is significantly reduced. How does Volspeed V4 Work?

The tuning kit can be activated directly on your bike's display. After pressing the' -' button and holding it for 3 seconds. After Tuning kit activation speed limit is displayed for 5 seconds.

If you would like to change maximumm speed, just press'Plus' or'Minus' keys. Default value: 20mph (32 km/h). The set value is saved. To deactivate the tuning kit, press the' -' button and hold it for 3 seconds again.

The tuning is always switched off after switching on the bike. It is possible to set a "softer curtailment behavior" (dynamic mode).

This significantly softens the otherwise very abrupt deceleration at the speed limit. Correct display of the speed, the distance covered and the average speed at all times. Is this Volspeed the right tuning kit for my bike? Including all Active Line, Active Line Plus, Cargo Line, Performance Line, Performance Line Speed, Performance Line CX models including motors of the 4th generation. Compatible with displays: - KIOX - INTUVIA - NYON - PURION - COBI Compatible with motors incl. Gen4: - Active Line Plus - Performance Line - Performance Line CX Line - Performance Line Speed - Cargo Line Compatibility table: How to install this tuning kit? When connecting Tuning Kit to an e-bike you will find connectors colored to make installation very simple.

We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning kit is just as easy. If you are planning to install Volspeed on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the tuning kit is activated. Electric bikes equipped with VOLspeed products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with VOLspeed products can be used exclusively on private property and entirely at one's own risk.

We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds. VOLspeed Products are thoroughly tested and we stand by their quality.